Welcome to MyParts Nigeria

Want Custom

Order?

Get in Touch
Not at the moment
51 Road, House 8, Festac Town, Lagos
Toll Free: 0800-697-2787
Mon.-Fri.:9am-6pm | Sat.:9am-4pm
Currency:
HomeShopReplacement PartsSensorsOxygen (02) SensorsDownstreamNTK Oxygen Sensor For Honda / Acura – 24473

NTK Oxygen Sensor For Honda / Acura – 24473

111,250

NTK 24473 Geniune Oxygen Sensor For Honda and Acura Vehicles:

  • You can depend on NGK for quality and reliability
  • Constructed from durable material
  • Corrosion and abrasion resistant
  • Sensors checks for the amount of oxygen in the exhaust
  • Ensures longevity
  • Position: Downstream

Fits the following Honda and Acura vehicles:

Fits the following Honda and Acura Vehicles:

ACURA TLX: 2.4L 2015-2020
HONDA ACCORD: 2.4L 2013-2017

Out of stock

Compare
NTK Oxygen Sensor For Honda / Acura – 24473

Description

NTK is the world’s leading supplier of OEM oxygen sensors. They’re individually tested to ensure the highest level of quality and reliability—designed to continuously detect the composition of exhaust gases. As the output from the sensors changes, the ECU instructs the fuel mixing system to alter the mixture. This ensures that the air/fuel mix is always correct and promotes efficiency. A new NTK oxygen sensor can help lower emissions, improve fuel mileage and engine efficiency, and extend catalyst life. These components meet or exceed OE specs and are equipped with waterproof, factory-fitted connectors to ensure a perfect fit every time.

  • You can depend on NGK for quality and reliability
  • Constructed from durable material
  • Corrosion and abrasion resistant
  • Sensors checks for the amount of oxygen in the exhaust
  • Ensures longevity
  • Position: Downstream

Fits the following Honda and Acura Vehicles:

ACURA TLX: 2.4L 2015-2020
HONDA ACCORD: 2.4L 2013-2017
O2 Sensor Identification Guide

An OBD Scan Tool will usually identify Oxygen Sensors by the Bank Number (B1 = Bank 1) and Sensor Number (S1 = Sensor 1). Bank 1 will always contain Cylinder 1, which is located closest to the front of the engine.

Part manufacturers often use different terms than scan tools to identify sensor positions. Regardless of the vehicle’s engine orientation, the right or left bank is determined by viewing the engine from the rear (opposite the drive belts).

A

Upstream Sensor (Before Converter)

B

Downstream Sensor (After Converter)

C

Left or Front Upstream Sensor (Before Converter)

D

 Right or Rear Upstream Sensor (Before Converter)

 

Engine Bank Identification 

 

 

 

Common O2 Sensor Contaminants

Oxygen (O2) Sensors commonly fail due to contamination. When checking or replacing an O2 Sensor, visually inspect the sensor body to determine if it has been contaminated by a faulty part or substance upstream, and correct the fault before replacing the sensor.

ANTIFREEZE POISONING
Common Causes:

  • Cracked or warped cylinder head
  • Leaking cylinder head gasket
  • Leaking intake manifold gasket
Antifreeze Poisoned O2 Sensor
Antifreeze Poisoned O2 Sensor

 

SILICONE POISONING
Common Causes:

  • Use of an improper silicone gasket sealant on the engine
Silicone Poisoned O2 Sensor
Silicone Poisoned O2 Sensor

 

CARBON BUILDUP
Common Causes:

  • Clogged air filter
  • Leaking or defective fuel injector
Carbon Buildup O2 Sensor
Carbon Buildup O2 Sensor

Additional information

Weight 5 kg

Brand

NTK

NTK High Quality Auto Parts made available to you, at competitive rates in Nigeria, with swift delivery. We have built strong affiliations with a lot of car manufacturers over the years just to make sure that we provide our customers with the best products available. In our business, there is no middleman, which is evident in our prices. Order & Buy NTK Auto Parts, Online, in Nigeria, with delivery.
NTK Oxygen Sensor For Honda / Acura – 24473

Reviews

There are no reviews yet.

Be the first to review “NTK Oxygen Sensor For Honda / Acura – 24473”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsNTK Oxygen Sensor For Honda / Acura - 24473 removeToyota Camry Shock Absorbers (Rear: R & L) by Monroe (72309 & 72310) removeToyota Highlander Shock Absorbers (Rear: R & L) by Gabriel (G56732 & G56733) removeToyota Camry Brake Pads (Rear) by Monroe removeHonda Accord Shock Absorbers (Rear: Right & Left) by Monroe removeToyota Avalon Brake Pads (Front) by Monroe remove
NameNTK Oxygen Sensor For Honda / Acura - 24473 removeToyota Camry Shock Absorbers (Rear: R & L) by Monroe (72309 & 72310) removeToyota Highlander Shock Absorbers (Rear: R & L) by Gabriel (G56732 & G56733) removeToyota Camry Brake Pads (Rear) by Monroe removeHonda Accord Shock Absorbers (Rear: Right & Left) by Monroe removeToyota Avalon Brake Pads (Front) by Monroe remove
ImageNTK Oxygen Sensor For Honda / Acura – 24473NTK Oxygen Sensor For Honda / Acura – 24473NTK Oxygen Sensor For Honda / Acura – 24473NTK Oxygen Sensor For Honda / Acura – 24473NTK Oxygen Sensor For Honda / Acura – 24473NTK Oxygen Sensor For Honda / Acura – 24473
SKU
Rating
Price111,25090,66092,10019,03278,60020,424
Stock

Out of stock

AvailabilityOut of stock
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

DescriptionNTK 24473 Geniune Oxygen Sensor For Honda and Acura Vehicles:
  • You can depend on NGK for quality and reliability
  • Constructed from durable material
  • Corrosion and abrasion resistant
  • Sensors checks for the amount of oxygen in the exhaust
  • Ensures longevity
  • Position: Downstream
Fits the following Honda and Acura vehicles: Fits the following Honda and Acura Vehicles:
ACURA TLX: 2.4L 2015-2020
HONDA ACCORD: 2.4L 2013-2017
Monroe OESpectrum Pair of Rear Strut for 2007-2011 Toyota Camry. Part #: 72309 and 72310 are specially designed for the replacement market to compensate for wear in the suspension and other components, which occurs normally in a car after having covered thousands of kilometres.Gabriel Ultra Pair of Rear Strut for 2004-2007 Toyota Highlander. Part #: G56732 and G56733 are specially designed for the replacement market to compensate for wear in the suspension and other components, which occurs normally in a car after having covered thousands of kilometres.Monroe Prosolution Ceramic Rear Brake Pads for 2007-2017 Toyota Camry. Part #: GX1212 are part of a range comprehensive brake products engineered to fit and perform like OE for virtually any application. Count on Monroe to provide OE-quality replacement products.Monroe OESpectrum Pair of Rear Strut for 2008-2012 Honda Accord. Part #: 72563 are specially designed for the replacement market to compensate for wear in the suspension and other components, which occurs normally in a car after having covered thousands of kilometres.Monroe Prosolution Ceramic Front Brake Pads for 2008-2018 Toyota Avalon. Part #: GX1293 are part of a range comprehensive brake products engineered to fit and perform like OE for virtually any application. Count on Monroe to provide OE-quality replacement products.
ContentNTK is the world's leading supplier of OEM oxygen sensors. They're individually tested to ensure the highest level of quality and reliability—designed to continuously detect the composition of exhaust gases. As the output from the sensors changes, the ECU instructs the fuel mixing system to alter the mixture. This ensures that the air/fuel mix is always correct and promotes efficiency. A new NTK oxygen sensor can help lower emissions, improve fuel mileage and engine efficiency, and extend catalyst life. These components meet or exceed OE specs and are equipped with waterproof, factory-fitted connectors to ensure a perfect fit every time.
  • You can depend on NGK for quality and reliability
  • Constructed from durable material
  • Corrosion and abrasion resistant
  • Sensors checks for the amount of oxygen in the exhaust
  • Ensures longevity
  • Position: Downstream
Fits the following Honda and Acura Vehicles:
ACURA TLX: 2.4L 2015-2020
HONDA ACCORD: 2.4L 2013-2017
O2 Sensor Identification Guide
An OBD Scan Tool will usually identify Oxygen Sensors by the Bank Number (B1 = Bank 1) and Sensor Number (S1 = Sensor 1). Bank 1 will always contain Cylinder 1, which is located closest to the front of the engine. Part manufacturers often use different terms than scan tools to identify sensor positions. Regardless of the vehicle's engine orientation, the right or left bank is determined by viewing the engine from the rear (opposite the drive belts).
A
Upstream Sensor (Before Converter)
B
Downstream Sensor (After Converter)
C
Left or Front Upstream Sensor (Before Converter)
D
 Right or Rear Upstream Sensor (Before Converter)
 
Engine Bank Identification 
 
 
 
Common O2 Sensor Contaminants
Oxygen (O2) Sensors commonly fail due to contamination. When checking or replacing an O2 Sensor, visually inspect the sensor body to determine if it has been contaminated by a faulty part or substance upstream, and correct the fault before replacing the sensor.
ANTIFREEZE POISONING
Common Causes:
  • Cracked or warped cylinder head
  • Leaking cylinder head gasket
  • Leaking intake manifold gasket
Antifreeze Poisoned O2 Sensor Antifreeze Poisoned O2 Sensor
 
SILICONE POISONING
Common Causes:
  • Use of an improper silicone gasket sealant on the engine
Silicone Poisoned O2 Sensor Silicone Poisoned O2 Sensor
 
CARBON BUILDUP
Common Causes:
  • Clogged air filter
  • Leaking or defective fuel injector
Carbon Buildup O2 Sensor Carbon Buildup O2 Sensor
Toyota Camry Shock Absorbers (Rear: Right & Left) by Monroe are specially designed for the replacement market to compensate for wear in the suspension and other components, which occurs normally in a car after having covered thousands of kilometres. Monroe OESpectrum Pair of Rear Strut for 2007-2011 Toyota Camry. Part #: 72309 and 72310 They are basically oil pumps. A piston is attached to the end of the piston rod and works against hydraulic fluid in the pressure tube. As the suspension travels up and down, the hydraulic fluid is forced through tiny holes, called orifices, inside the piston. However, these orifices let only a small amount of fluid through the piston. This slows down the piston, which in turn slows down spring and suspension movement. The amount of resistance a shock absorber develops depends on the speed of the suspension and the number and size of the orifices in the piston. All modern shock absorbers are velocity sensitive hydraulic damping devices - meaning the faster the suspension moves, the more resistance the shock absorber provides. Because of this feature, shock absorbers adjust to road conditions. As a result, shock absorbers reduce the rate of: * Bounce * Roll or sway * Brake dive and Acceleration squat Shock absorbers work on the principle of fluid displacement on both the compression and extension cycle. A typical car or light truck will have more resistance during its extension cycle then its compression cycle. The compression cycle controls the motion of a vehicle's unsprung weight, while extension controls the heavier sprung weight. Order & Buy Toyota Camry Shock Absorbers (Rear: Right & Left) by Monroe online in Nigeria with deliveryToyota Highlander Shock Absorbers AWD (Rear: Right & Left) by Gabriel for today’s vehicles are in a class of their own. Ultras are precision engineered with our exclusive G-Force™ Technology for quicker response, longer life, improved comfort, control and maximum shock performance. Gabriel Ultra Pair of Rear Strut for 2004-2007 Toyota Highlander. Part #: G56732 and G56733 Breathe new life into your vehicle’s suspension with Ultra’s StableSteer™ valving and the G-Force piston’s sintered iron construction, which provides greater durability and longer life. A self-compensating, leak-proof piston seal eliminates oil bypass by providing a positive seal between the piston and working cylinder, minimizing friction, and a larger, bulged tube aids in cooling – giving you the ultimate in comfort and performance. Continued comfort comes from knowing that, like all Gabriel products, Ultra shocks and struts utilize a super-finished chromed piston rod to inhibit rust and corrosion. So, whether you’re the type of person who wants the ultimate driving experience and demands improved performance and handling, or you’re the type who puts big demands on your vehicle by hauling cargo – there’s no better choice than Ultra shocks and struts from the Original Gabriel. Features & Benefits * Infinitely Variable Damping for on-demand control on all road conditions * G-Force technology for quicker response, improved product life and consistent, reliable ride control * StableSteer valving provides improved tire contact with the road for control, safety, and performance * 1 3/8” bore piston (in most applications) with bonded iron construction for durability and longer life * Leak-proof piston seal and rod guide eliminates oil bypass * Orifice Control Disk with variable nine-stage valving provides consistent oil flow * OE-design single-lip oil seal minimizes friction for optimal sealing * Super-finished chromed piston rod provides superior corrosion resistance and enhances sealing properties * Larger, bulged tube (in most applications) aids in cooling Order & Buy Toyota Highlander Shock Absorbers AWD (Rear: Right & Left) by Gabriel online in Nigeria with deliveryToyota Camry Brake Pads (Rear) by Monroe are part of a range comprehensive brake products engineered to fit and perform like OE for virtually any application. Whether it's a domestic or import car, truck, minivan or SUV , or a commercial application – including medium-duty, severe service and fleet vehicles – count on Monroe to provide OE-quality replacement products. To maintain vehicle braking performance, the generally accepted recommendation is to follow the OE manufacturer's choice of friction material (replacing semi-metallic with semi-metallic, organic with organic, etc.). There are, however, options for improving braking performance, and Monroe offers choices to assist in making the best selection to meet vehicle braking requirements. Monroe Prosolution Ceramic Rear Brake Pads for 2007-2017 Toyota Camry. Part #: GX1212 Order & Buy Toyota Camry Brake Pads (Rear) by Monroe online in Nigeria with deliveryHonda Accord Shock Absorbers (Rear: Right & Left) by Monroe are specially designed for the replacement market to compensate for wear in the suspension and other components, which occurs normally in a car after having covered thousands of kilometres. Monroe OESpectrum Pair of Rear Strut for 2008-2012 Honda Accord. Part #: 72563 They are basically oil pumps. A piston is attached to the end of the piston rod and works against hydraulic fluid in the pressure tube. As the suspension travels up and down, the hydraulic fluid is forced through tiny holes, called orifices, inside the piston. However, these orifices let only a small amount of fluid through the piston. This slows down the piston, which in turn slows down spring and suspension movement. The amount of resistance a shock absorber develops depends on the speed of the suspension and the number and size of the orifices in the piston. All modern shock absorbers are velocity sensitive hydraulic damping devices - meaning the faster the suspension moves, the more resistance the shock absorber provides. Because of this feature, shock absorbers adjust to road conditions. As a result, shock absorbers reduce the rate of: * Bounce * Roll or sway * Brake dive and Acceleration squat Shock absorbers work on the principle of fluid displacement on both the compression and extension cycle. A typical car or light truck will have more resistance during its extension cycle then its compression cycle. The compression cycle controls the motion of a vehicle's unsprung weight, while extension controls the heavier sprung weight. Order & Buy Honda Accord Shock Absorbers (Rear: Right & Left) by Monroe online in Nigeria with deliveryToyota Avalon Brake Pads (Front) by Monroe are part of a range comprehensive brake products engineered to fit and perform like OE for virtually any application. Whether it's a domestic or import car, truck, minivan or SUV , or a commercial application – including medium-duty, severe service and fleet vehicles – count on Monroe to provide OE-quality replacement products. To maintain vehicle braking performance, the generally accepted recommendation is to follow the OE manufacturer's choice of friction material (replacing semi-metallic with semi-metallic, organic with organic, etc.). There are, however, options for improving braking performance, and Monroe offers choices to assist in making the best selection to meet vehicle braking requirements. Monroe Prosolution Ceramic Front Brake Pads for 2008-2018 Toyota Avalon. Part #: GX1293 Order & Buy Toyota Avalon Brake Pads (Front) by Monroe online in Nigeria with delivery
Weight5 kg9 kg9 kg9 kg9 kg11 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 5 kg
Weight 9 kg
Brand

Weight

Weight 9 kg
Brand

Weight

Weight 9 kg
Brand

Weight

Weight 9 kg
Brand

Weight

Weight 11 kg
Brand

Weight

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare
X
×